86-0574-62162348

Denmark Power Cord Standard

Denmark AFSNIT 107-2-D1 DEMKO Power Plug Flexible Cable Extension Socket

In Denmark the standard voltage is 230 V. The standard frequency is 50 Hz. The power sockets that are used are of type F / K. .The Danish electrical equipment inspection institute is a government agency in the country, its purpose is to protect the public, life and fire risk in order to prevent the use of special electrical equipment and bring. Plug without Mark of DEMKO approved shall not be used.

Contents
1 . Plug Guide
2 . Power Cords
3 . Extension Cords
4 . Flexible Cables
5 . Certifications
6 . Reference

Plug Guide

Danish 107-2-D1 Plug 16A

This Danish standard plug is described in the Danish Plug Equipment Section 107-2-D1 Standard sheet (SRAF1962/DB 16/87 DN10A-R). Unlike the French CEE 7/6 plug, the earthing pin is on the plug, not in the socket. The Danish socket need not be recessed to protect the earthing pin. The Danish standard provides for sockets to have child-resistant shutters. A variation (standard DK 2-5a) of the Danish plug is for use only on surge protected computer sockets. It fits into the corresponding computer socket and the normal socket, but normal plugs deliberately don't fit into the special computer socket. The plug is often used in companies, but rarely in private homes.

Power Cord

Denmark power supply cords with DEMKO certification built to Afsnit 107-2-D1, Normblad C 4 and IEC standards for Danish power cord applications. We are producing two and three prong Denmark power cords in standard configurations and can make any custom version as well.100% of our Denmark AC power cables are fully molded high quality cords and RoHS and REACH compliant,We are China leading Danish power cord manufacturer and supplier providing cheapest prices of Denmark Afsnit 107-2-D1, Normblad C 4 plug with IEC C13,C15,C19 power connectors.


Power Supply Cord Denmark DEMO Non-rewireabe Plug	Power Supply Cord Denmark Rewireabe Plug

IEC 60320 Connectors

IEC 60320 power cables come in normal and high-temperature variants, as well as various rated currents. The connectors have slightly different shapes to ensure that it is not possible to substitute a cable with a lower temperature or current rating, but that it is possible to use an overrated cable. Cords also have different types of exterior jackets available to accommodate environmental variables such as moisture, temperature, oils, sunlight, flexibility, and heavy wear. For example, a heating appliance may come with a cord designed to withstand accidental contact with heated surfaces. Worldwide, more than twelve different types of connectors are used for fixed building wiring. Products sold in many different markets can use a standardized IEC 60320 connector and then use a detachable power cord to match the local electrical outlets. This simplifies safety approvals, factory testing, and production since the power cord is a low-cost item available as a commodity. Note that the same types of appliance-side connectors are used with both 110 V and 230 V power cables, so care must be used when moving appliances between countries with different voltage standards — substituting a power cord that matches local power outlets will result in an incorrect voltage being applied to the appliance or equipment. Unless explicitly labelled as capable of handling local voltages, this is very likely to damage or destroy the appliance. Some devices have a slide-switch to adapt to different voltages, or wide-ranging power supplies.


IEC 60320 C5 Power Receptacle	IEC 60320 C5 Power Cord	IEC 60320 C5 Power Cord with Protection Cover	IEC 60320 C7 Power Cord

IEC 60320 C7 Power Receptacle	IEC 60320 C13 Power Cord	IEC 60320 C13 Power Cord Right Angle	IEC 60320 C13 Power Cord Custom Made

IEC 60320 C13 Power Cord Waterproof	IEC 60320 C14 Power Plug	IEC 60320 C14 Power Plug Waterproof	IEC 60320 C14 Power Plug Custom

IEC 60320 C14 Power Cord Right Angle	IEC 60320 C15 Power Cord	IEC 60320 C15 Power Cord Right Angle	IEC 60320 C17 Power Connector

IEC 60320 C18 Power Plug	IEC 60320 C19 Power Connector	IEC 60320 C19 Power Cord Right Angle	IEC 60320 C20 Power Cord

Extension Cord

Denmark extension power cord are built to DEMO standards for Danish AC extension cord applications We are producing rewireable and non-rewireable Denmark extension cable in standard configurations and can make any custom version as well.100% of our extension power sockets are fully molded with high quality cords and RoHS,REACH compliant as we are China leading Denmark extension cord manufacturer and supplier providing competitive prices of extension power cords,extension cable and power extension sockets products.
Sockets
The Danish socket will also accept the CEE 7/16 Europlug or CEE 7/17 Schuko-French hybrid plug. CEE 7/4 (Schuko), CEE 7/7 (Schuko-French hybrid), and earthed CEE 7/6 French plugs will also fit into the socket but should not be used for appliances that need earth contact. The current rating on both plugs is 13 A.
There is a variation for hospital equipment with a rectangular left pin, which is used for life support equipment.

Traditionally all Danish sockets were equipped with a switch to prevent touching live pins when connecting/disconnecting the plug. Today, sockets without switch are allowed, but then it is a requirement that the sockets have a cavity to prevent touching the live pins. The shape of the plugs generally makes it difficult to touch the pins when connecting/disconnecting.

Since the early 1990s earthed sockets have been required in all new electric installations in Denmark. Older sockets need not be earthed, but all sockets, including old installations, must be protected by earth-fault interrupters (HFI or HPFI in Danish) by 1 July 2008.

As of 1 July 2008, wall sockets for French 2-pin, female earth CEE 7/5 are permitted for installations in Denmark.[49] This was done because no electrical equipment sold to private users is equipped with a Danish plug.

Sockets for the Schuko were not permitted until 15 November 2011. It could also result in a bad connection of the pins, with resultant risk of overheating and fire. Many international travel adapter sets sold outside Denmark match CEE 7/16 (Europlug) and CEE 7/7 (Schuko-French hybrid) plugs which can readily be used in Denmark.

Denmark has allowed CEE 7/3 "Schuko" sockets from 15 November 2011


Extension Cable Denmark Non-rewireable plug and Receptacle XH012-Z	Extension Cable Denmark Rewireable Socket XH03-SA	Extension Cable Denmark Rewireable Plug and Receptacle XH012-ZA

Cable Reel

Denmark extension cable reels with CE approvals are manufactured to DEMKO and Afsnit 107-2-D1,We are producing Denmark extension wire reels in standard configurations and can make any custom version as well. 100% of our Denmark cable reels are fully molded high quality cords and Rohs/Reach compliant as we are China leading Denmark extension cable reel manufacturer.


Cable Reel Denmark 4 Outlet XRD430/XRD460	Cable Reel Denmark With Protection Covers XRD430-F/XRD460-F

Flexible Cable

Denmark power cable use PVC and rubber same as European standard

PVC Insulated Flexible Cord

Cable type	Number of cores conductors Section mm2
H03VVH2-F ( Flat)	2 x 0.5-0.75
H03VV-F	2-4 x 0.5-0.75
H05VVH2-F (Flat)	2x 0.75-1.0
H05VV-F	2-5 x 0.75-4.0

90 PVC Insulated Heat-resistant Flexible Cord

Cable type	Number of cores conductors Section mm2
H03V2V2H2-F ( Flat)	2 x 0.5-0.75
H03V2V2-F	2-4 x 0.5-0.75
H05V2V2H2-F ( Flat)	2 x 0.75-1.0
H05V2V2-F	2-5 x 0.75-4.0

Insulated and Sheathed with halogen-free thermoplastic compounds

Cable type	Number of cores conductors Section mm2
H03Z1Z1 H2-F ( Flat)	2 x 0.5-0.75
H03Z1Z1-F	2-3 x 0.5-0.75
H05Z1Z 1H 2-F ( Flat)	2 x 0.75-1.0
H05Z1Z1-F	2-3 x 0.75-1.5

Rubber Flexible Cord

Cable type	Number of cores conductors Section mm2
H05RN-F	2-3 x 0.75-1.0
H05RR-F	2-5 x 0.75-4.0
H07RN-F	2-5 x 1.0-4.0

Water resistant Polypropylene or equivalent synthetic Elastoplast sheath cables

Cable type	Number of cores conductors Section mm2
H07RN8-F	2-5 x 1.0-4.0

Single core non-sheathed cable for decorative chains

Cable type	Number of cores conductors Section mm2
H03VH7-H	1 x 0.5-0.75

Single core non-sheathed cable for internal wiring for a conductor temperature of 90

Cable type	Number of cores conductors Section mm2
H05V2-K	1 x 0.5-1.0

Cable for photovoltaic systems

Cable type	Number of cores conductors Section mm2
PV1-F 0.6/1KV	1.5mm2 2.5mm2 4.0mm2 6.0mm2 25mm2 35mm2

Certification

Denmark DEMKO

Reference

1 . Catalog Denmark and Other Countries Online 2012 catalog of power cord sets except of United States.

Contact Us
Simen Twon,Yuyao City,Zhejiang,China,315472
86-0574-62162348
86-0574-62160100
[email protected]
hoobo.show1
Terms and Conditions
Privacy Statement

SUBSCRIBE
Join us and get detail information,technical parameter and new products etc.

[email protected]
hoobo.show1
86-0574-62162348
86-0574-62162348